Click on your Mac Hard Drive.
Click on the Mac Assistants folder.
Click on the Internet Setup Assistant.
Internet Setup Assistant appears. Simply click Yes to continue...
The next screen will ask if you already have an Internet account; click Yes to continue...
This screen asks you if you have the information needed to set up your account. Click the arrow in the bottom right to move on to the next step...
Note that for a typical dialup account, it is not necessary for you to know the DNS server nor the IP address as these will be setup to be 'server assigned' later in the configuration process.
This screen will ask for what name you would like to call your connection, enter eNetFirst, and then select Modem and click the arrow to continue...
The Macintosh OS usually selects the modem already installed on your system. If you wish to choose a different modem, select it from the drop down list, as well as the port you wish to use. Click the arrow to move to the next step...
This step will ask you for your local dialup number; enter it without the area code unless you have 10-digit dialing in your area. (In GA, please use the area code)
It will also ask for your Login ID. Your Login ID is your username plus the @dialup-services.com realm (example: firstname.lastname@example.org). Your login ID MUST be all lowercase letters and have the @dialup-services.com realm. Click the arrow to move to the next step...
This screen asks you if you require a PPP connect script when you log on. Select no and click the right arrow to continue...
This step asks if you if there is a specific Static IP address for your setup, select No and click the arrow to continue to the next step...
This screen asks you for your Domain Name Servers (DNS).
It is recommended that you leave this blank and your DNS servers will be assigned automatically when you connect to eNetFirst, Inc.
However, if you are having difficulties browsing the web once connected, you can enter the following IP address number(s).
eNetFirst.net DNS Server IP
In the Domain Name box you can enter eNetFirst.net. The domain name is optional. Click the right arrow to move to the next step...
This screen asks for your e-mail address and password. Please enter your e-mail address (example: email@example.com).
You must enter this information in all lower case letters. Your e-mail password must also be in all lower-case letters.
Click the right arrow to move to the next step...
This screen is asking for the incoming (POP3) and outgoing (SMTP) mail server names. In the first field, enter just your username,
and leave off @enetfirst.com (example: johnsmith).
In the second field, enter the incoming mail host server which is mail.enetfirst.com and the outgoing mail host server which is asp-3-submit.reflexion.net . Click the right arrow to move to the next step...
This step is looking for the News server name. You may skip this step.
This step is asking if you are using a proxy server. Unless you are using a proxy server, or if you have no idea what a proxy server is, then select No and click the right arrow to move to the next step...
This is the final step in setting up your internet connection for eNetFirst.
Take the check mark out of "Connect when finished" and then click on "Go Ahead" to complete your setup.
If there are any problems or errors, contact your eNetFirst, Inc. technical representative for more information.